TrueView 435 Hardware User Guide
45
TrueView 435 Hardware User Guide
10/26/2021
Hardware Maintenance
Dust Filter
Your TrueView 3DIS has a built-in fan to help to cool the internal processors. A filter is needed to
prevent dust from entering the system and this filter will need to be changed periodically. A spare filter
is included with your sensor spare parts. The steps below explain how to change this filter.
1.
First locate the dust cover on your sensor. For TrueView 400 and 500 series, the dust cover is
located on top of the sensor, beneath the aluminum mounting frame (Figure 58). For TrueView
600 Series, the dust cover is located on the front of the sensor above the battery compartment
(Figure 59)
Figure 58 - TrueView 400/500 Series
Figure 59 - TrueView 600 Series