ML_RGT03_V5_english.doc
RGT-03
PROGRAMMABLE GSM THERMOSTAT
USER GUIDE
The RGT-03 is an automatic SMS programmable
control device made for the temperature control of
apartments, weekend houses or even whole
buildings.
The
selectable
pre-programmed
algorithms make it ideal for the operation of gas,
oil, electric heating systems (including pumps) and
air-conditioners. The built in GSM unit provides the
remote access and guarantees the exact timing.
Distant programming and the inquiry of data is
easily done by simple SMS messages, while the
controller also can be set on the spot with three
buttons and an LCD display.
Technical data
Controlling accuracy
±0,3°C
Temperature range
5 … 40°C, in 1°C steps
Controlling method
PI (proportional integrating)
Temperature display
-3 … 50°C, in 0,1°C steps
Sensor
NTC thermistor 10K @ 25°C
Programming
7 days, 4 set point/day
Relay switch
Single Pole Double Throw
voltage: 24V-230VAC
load: 6A ohmic, 3A inductive
Relay life
100 000 switches
Power input
10 … 13VDC, max. 110 mA
Operating temperature -20 … 55°C operation
-40 … 85°C transport or storage
Dimensions
120x70x25 mm (W, H, D)
Features
•
Instant and remote programming
•
Inquiry via SMS or phone call
•
MANUAL mode: Operates as a thermostat
with fixed set point through the day.
•
AUTO mode: Follows a user-defined
program with 4 target temperatures and
switching times/day for each day of a week.
•
HOLIDAY mode: Follows Sunday
program on the current day and the day
after.
•
Temperature override
•
All data is kept in case of a power loss
•
Control program for seven different types
of heating/cooling systems
•
Optional distantly mounted heat sensor
•
ALARM SMS in case of over or under
heating/cooling
•
Can be customised at initial setup:
o
Heating/cooling system
o
Temperature shift
o
Safety temperature limit
o
Forced pump operation
o
Weekly program
o
Language of SMS messages
