25
The. lower. table. on. the. machine. is. interchangeable.. Different. sized.
optional. tables. can. be. obtained. for. various. materials. &. handling.
requirements..
The.tables.simply.fit.right.onto.the.
bottom.pedestal..There.are.two.steel.
pins.that.look.like.“bullets”.that.fit.
into. the. two. corresponding. holes.
in.the.bottom.tables..They.may.be.
tight. from. the. factory,. and. can. be.
reamed.out.to.allow.for.a.looser.fit.
and.faster.change-out.
Custom. lower. tables. and. pedestals. are. available. from. the. factory. for.
specific.needs..Tongue-style.pedestals.with.the.support.at.the.rear.are.
often. requested. for. pocket/bag. loading. applications.. These. “diving-
board”. anvil. style. pedestals. are. especially. helpful. with. hard-to-load.
applications.
Interchangeable Tables
Maintenance
The.majority.of.the.press.has.been.designed.to.be.as.maintenance.free.
as.possible..There.are.only.a.few.aspects.of.the.machine.that.should.be.
monitored.to.insure.proper.operation.
• The solenoid/mac valve that actuates the cylinder and the air-regulator/air-
gauge assembly can become clogged and no longer fully switch the air on
& off to the cylinder. It is highly recommend to supply only filtered, dried
(“chilled”) air to the press. This will prolong the life of the air components
on the press.
• The silicone pad on the lower table can degrade after much use and over
an extended period of time. This pad is replaceable. If the pad becomes
dried out, cracked, or there are chunks removed from the silicone pad, this
can result in inconsistent and poor quality transfers.
Parts / Maintenance / Misc
