geo-FENNEL GeoDist
®
6
EN
Measuring Functions
Measuring single distance
1
Aim active laser at target.
2
8.532
m
3
i
Target surfaces: Measuring errors can occur
when measuring to colourless liquids, glass, sty-
rofoam or semi-permeable surfaces or when aim-
ing at hight gloss surfaces. Against dark surfaces
the measuring time increases.
Permament / Minimum-Maximum measuring
1
2 sec
8.532
m
Used to measure room diagonals (maximum val-
ues) or horizontal distance (minimum values)
The minimum and maximum dis-
tance measured is displayed
(min, max.). The last value meas-
ured is displayed in the main line.
min.
max.
2
Stops permanent / mini-
mum-maximum measuring.
3
Add / Subtract
7.332
m
1
The next meas-
urement is add-
ed to the
previous one.
2
The next meas-
urement is sub-
tracted from the
previous one.
7.332
m
12.847
m
3
i
This process can be repeated as required.
The result is shown in the main line and the
measured value above.
The same process can be used for adding or
subtracting areas or volumes.
