EN
22
MM INDICATION
In case the reference level of the receiver is e. g.
18 mm below the laser beam - this height difference
will be displayed by an exact numerical value (see
the left diagram).
further examples
The laser beam is
exactly on-level.
The laser beam is
27 mm above the
reference point
(move the receiver
up).
The laser beam is
11 mm below the
reference point
(move the receiver
down).
RECEIVE A LASER BEAM
Power on the receiver and make all required settings (i. e. accuracy fine,
sound high). Carefully move the receiver up and down to detect the laser
beam
PLEASE NOTE:
If the distance between the rotating laser and the receiver is less than 1 m
erroneous measurements may occur.
Indication 1
The „laser beam high“
arrow is illuminated.
Acoustic signal:
Fast, short beep.
->Move the receiver
up.
Indication 2
The „laser beam low“
arrow is illuminated.
Acoustic signal:
Slow, short beep.
->Move the receiver
down.
Indication 3
The LED „0-position“
bar is illuminated.
Acoustic signal:
Continuous beep.
-> On level.
