•
Manufacturer’s sole responsibility is to provide a warranty on the specified performance of the product under
normal operating conditions for a period of 3 years.
WARRANTY:
•
Genz Benz Enclosures, Inc. warrants the model UC5 to be free from defects in materials and workmanship for a
period of 3 years from the date of purchase, when purchased from an authorized Genz Benz dealer.
•
This warranty does not cover normal wear and tear incurred from the normally designed use of the product.
•
This warranty is effective only if a copy of the original sales receipt is presented at the time of warranty service.
•
This limited warranty is completely transferable to any subsequent buyer as long as the original sales receipt is
also transferred to such subsequent buyer.
•
All warranty service must be performed by a Genz Benz authorized service center.
•
Before returning any unit for service, a returned merchandise authorization number (RMA#) must be obtained by
calling 480-941-0705.
ENGINEERING SPECIFICATIONS
INPUTS 1-4
XLR Balanced input impedance:
4.7 kohms
XLR Balanced input sensitivity:
-60 to –20 dBV
¼” Unbalanced input impedance:
100 kohms
¼” Unbalanced input sensitivity:
-50 to -10 dBV
INPUT 5
¼” unbalanced and RCA input impedance:
15 kohms
¼” unbalanced and RCA input sensitivity:
-30 to +4 dBV
AMPLIFIER OUTPUT
Power at 8 ohm load/channel (Dual mono mode)
60 watts RMS
Power at 4 ohm load/channel (Dual mono mode)
100 watts RMS
Power at 8 ohm load (Bridged mono mode)
200 watts RMS
THD + N (preamp):
<0.03%
THD + N (power amp):
<0.05%
Frequency response:
20 Hz – 20 kHz +/- 1dB
CHANNEL EQUALIZATION
Low frequency:
125 Hz shelving, +/-15dB
Mid frequency (sweep):
1kHz , peaking, +/-12dB
High frequency:
8 kHz shelving, +/-15dB
DIRECT OUTPUTS
XLR balanced output level:
-20 dBV nominal
XLR balanced output impedance:
150 ohms
PRE OUT/PWR IN
¼” unbalanced output level:
+4 dBv nominal
¼” unbalanced output impedance:
1 kohm
¼” unbalanced input level:
+4 dBv nominal
¼” unbalanced input impedance:
10 kohm
DIGITAL EFFECTS
Processor type:
Alesis
DSP engine
Internal processing:
24 bit
A/D converter:
24 bit – 64X oversampling
D/A converter:
24 bit – 128X oversampling
Dynamic Range:
80 dB
THD + N (1 kHz):
<0.01%
¼” effects cancel jack:
short T-S cancels return
INTERNAL PRESET EFFECTS PROGRAMS:
3 – plate reverbs
3 – room reverbs
2 – hall reverbs
1 – rotary effect
1 – chorus
