background image

8

Specifications

SAFE OPERATING REQUIREMENTS:

• Never set an amplifier on anything that will tip over or collapse under its weight.

• Provide a minimum distance of  25.4 mm (1 inch) around all sides of the amplifier for sufficient ventilation.  

  The ventilation should not be impeded by covering the amplifier’s vent openings with items such as newspapers,

  table-cloths, curtains, etc.

• No naked flame sources, such as lighted candles, should be placed on the SHUTTLE MAX 6.0 amplifier.

• This amplifier should not be exposed to dripping or splashing and no objects filled with liquids, such as vases or

  drinks, should be placed on this product.

• The SHUTTLE MAX 6.0 amplifier should be connected to a mains socket outlet (power receptacle) with a protective

  earth (ground) connection at all times.

• The amplifiers mains plug (power plug) is considered the disconnect device and the connection must remain 

  accessible at all times.

• This amplifier is capable of producing sound pressure levels that may cause hearing loss.

• There are no user serviceable parts and hazardous operating voltages are present inside this unit. Always consult a

  qualified repair facility for service.

WARNING!

• The use and operation of this device constitutes an agreement of full release of any and all liability connected with its

  use. Only persons familiar with the operation of high-powered professional audio equipment should attempt to operate

  this device.

• In addition, by use of this device, the user agrees to hold Genz Benz and its designers, sales agents and all other 

  affiliates and related parties harmless in the event of any accident, injury, damage or loss resulting from such use.

• Manufacturer’s sole responsibility is to provide a warranty on the specified performance of the product under normal

  operating conditions for a period of 3 years.

WARRANTY:

• Genz Benz warrants the SHUTTLE MAX 6.0 to be free from defects in materials and workmanship

  for a period of 3 years from the date of purchase, when purchased from an authorized Genz Benz dealer.

• This warranty does not cover normal wear and tear incurred from the normally designed use of the product.

• This warranty is effective only if a copy of the original sales receipt is presented at the time of warranty service 

• This limited warranty is completely transferable to any subsequent buyer as long as the original sales receipt is also

  transferred to such subsequent buyer.

• All warranty service must be performed by a Genz Benz authorized service center. 

• Before returning any unit for service, a returned merchandise authorization number (RMA#) must be obtained by 

  calling 480-941-0705

• This warranty is valid in the US and Canada only.  For all products sold outside the USA, warranty is handled through     

  our international distributor for each country.   For more information visit our website www.genzbenz.com

STL-MAX 6.0

Rated Power:  

600 Watts @ 4 ohms 

Dimensions: 

3.5”H X 13.5”W X 13”D 

Weight: 

5.75 LBS 

Summary of Contents for SHUTTLE MAX 6











Reviews: