SHENANDOAH™ STEREO 60LT
ENGINEERING SPECIFICATIONS
INPUTS
XLR Balanced input impedance:
2.2 k ohms
XLR Balanced input sensitivity:
-60 to -30 dBV
¼” Unbalanced input impedance:
300 k ohms
¼” Unbalanced input sensitivity:
-30 to +4 dBV
AMPLIFIER OUTPUT
Power at 4 ohm load:
30 watts per side RMS, 60 watts total
THD + N (preamp):
<0.035%
THD + N (power amp):
<0.07%
Frequency response:
20 Hz -20 kHz +/- 1dB
CHANNEL EQUALIZATION
Low frequency:
125 Hz shelving, +/-15dB
Mid frequency (sweep):
250 Hz - 5 kHz , peaking, +/-12dB
High frequency:
8 kHz shelving, +/-15dB
DIRECT OUTPUTS
XLR balanced output level:
-30 dBV nominal
XLR balanced output impedance:
150 ohms
¼” unbalanced output level:
+4 dBv nominal
¼” unbalanced output impedance:
1k ohm
DIGITAL EFFECTS
Processor type:
WAVE FRONT™ STEREO DSP engine
Internal processing:
24 bit
A/D converter
24 bit - 64X oversampling
D/A converter:
24 bit - 128X oversampling
Dynamic Range:
80 dB
THD + N (1 kHz)
<0.01%
Sampling rate:
48 kHz
Due to continuing product improvements and changes, all specifications are subject to change without notice.
