Genz Benz GBE 1200 Technical Manual Download Page 7

7811 E. Pierce St.  Scottsdale, AZ 85257

Ph: 480-941-0705  Fax: 480-946-2412

www.genzbenz.com

DECLARATION OF CONFORMITY

(89/336 EEC-EMC DIRECTIVE)

Manufacturer’s Name:  

Genz Benz, a division of KMC Music Company

Manufacturer’s Address: 

7811 East Pierce Street

 

 

 

 

Scottsdale, AZ 85257, U.S.A.

Product Type: 

 

 

Audio Amplifier

Model Number:

 

 

GBE 1200

Operating Power Condition:

  115/230VOLT, 50/60 Hz

Effective Date:

  

 

01-01-2006

Conforms to the Following Standards:

 

[X]  EN 55013: 2001 + A1: 2003

 

 

 

 

 

 

[X]  EN 55020: 2002 + A1: 2003

 

 

 

 

 

 

[X]  EN 60065

 

 

 

 

 

 

[X]  IEC 61000-3.3: 1994 + A1: 2001

 

 

 

 

 

 

[X]  IEC 61000-4.2

 

 

 

 

 

 

[X]  IEC 61000-4.3

 

 

 

 

 

 

[X]  IEC 61000-4.4

 

 

 

 

 

 

[  ]  FCC 47CFR Part 15-B, Class B

 

 

 

 

 

 

[X]  RoHS Directive 2002/95/EC

 

 

 

 

 

 

[X]  WEEE Directive 2002/96/EC

 

 

 

 

 

 

[X]  CE Mark LV Directive 73/23 EEC

WARNING!

•The use and operation of this device constitutes an agreement of full release of any and all liability connected with its

 use. Only persons familiar with the operation of high-powered professional audio equipment should attempt to operate

 this device.

•In addition, by use of this device, the user agrees to hold Genz Benz and its designers, sales agents and all other 

 affiliates and related parties harmless in the event of any accident, injury, damage or loss resulting from such use.

•Manufacturer’s sole responsibility is to provide a warranty on the specified performance of the product under normal

 operating conditions for a period of 3 years.

WARRANTY:

•Genz Benz warrants the model GBE 1200 to be free from defects in materials and workmanship for a

 period of 3 years from the date of purchase, when purchased from an authorized Genz Benz dealer.

•This warranty does not cover normal wear and tear incurred from the normally designed use of the product.

•This warranty is effective only if a copy of the original sales receipt is presented at the time of warranty service 

•This limited warranty is completely transferable to any subsequent buyer as long as the original sales receipt is also

 transferred to such subsequent buyer.

•All warranty service must be performed by a Genz Benz authorized service center. 

•Before returning any unit for service, a returned merchandise authorization number (RMA#) must be obtained by calling

 480-941-0705

• This warranty is valid in the US and Canada only. For all products sold outside the USA, warranty is handled through

  our international distributor for each country.  For more information visit our website www.genzbenz.com

A KMC Music Company, Bloomfield, CT

REV. 5

7

Summary of Contents for GBE 1200








Reviews: