A
B
C
Front View
A
B
C
STEP
1
STEP
2
STEP
3
STEP
4
Starting from the back of the rack. Place the ladders on flat, soft
surface, so not to damage front of rack. Space the ladders
accordingly.
(Note: Ensure proper placement of ladders,
and bottoms are all in same direction as shown.)
From the bottom and working your way up, place the back spacer bars (4b) according to the
ladder notches. Make sure to carefully interlock the spacer bars to the ladders.
Once spacer bars are properly placed. Start from
the bottom of the rack, firmly apply pressure to lock
in the joint. Then apply two nails with a nail-gun, to
each joint. Remember to firmly lock in each joint.
While backs are still facing up, screw the angled brackets
to the back spacer bars as shown.
Front of ladder
(Note: Bigger notch is
bottom of ladders)
Back of ladder
Back
Flush
Firm Pressure
Firm Pressure
Brackets
Brackets
(Note: Bottom brackets
should be mounted on
top of spacer bar,
instead of underneath)
Apply Nails
3
2
1
4b
Angled
Flat
