TECHNICAL SUPPORT:
1.800.283.5936 (USA) OR 1.801.974.3760
SETUP •
SETUP GENIE
14
Step 3.
Press the
UP/DOWN
arrow buttons to select the type of video
signal your primary input device (such as a camera or VCR) will provide.
Press
ENTER
to continue. The Video Output screen (Figure 7) appears.
Step 4.
Press the
UP/DOWN
arrow buttons to select a primary type of
output signal, then Press
ENTER
to continue.
"
If your facility uses the V.35 network protocol, the V.35 Dial
Type screen (Figure 8) appears.
"
If your facility uses the U or S/T protocol, the Network Type
screen (Figure 9) appears.
Figure 6. Video Input Screen
All Versions
Figure 7. Video Output Screen
All Versions
