T E CH N I C A L S U P P O RT:
1.800.283.5936 (USA) OR 1.801.974.3760
P RO G R A M M I N G •
MUTE
To Program Mute
There are ten locations for storing mute commands. All mute com-
mands stored are performed when the MUTE ON or MUTE OFF button
is pressed.
Press and hold the PROG. button until both LEDs in the receiver flash.
Press the MUTE ON button
Select a location for muting (0-9).
Select the device type (0=device connected to, 1=AP800, 2=AP10,
3=AP400, *=all devices).
Select the device ID (0-7, *=all units).
Select channel for muting (*, 01-08, 11-15). See table to the right.
Select 4 for input or 6 for output.
To erase a programmed location press PROG., MUTE ON, location (0-9),
MUTE OFF.
Examples:
Mute all mics on all units and store it in location 0 (default).
Mute all mics on AP400 #1 and store it in location 2.
Mute output D on AP400 # 0 and store it in location 3.
13
Location
Device Type
Device ID
Channel
Input/Output
Channel
Input/Output
Location
Device Type
Device ID
Device Type
Channel
Location
Device ID
Input/Output
*
All Mics
01
Channel 1
02
Channel 2
03
Channel 3
04
Channel 4
05
Channel 5
06
Channel 6
07
Channel 7
08
Channel 8
11
Channel A
12
Channel B
13
Channel C
14
Channel D
15
Channel T
