4
P a c k D o w n / / G T S k y L o f t
Step 1
Deflate the nosecone first by inserting your index finger and pushing down the blue
tab on the inside valve. Repeat this with the 3 inner supports.
Step 2
Repeat this process for the two upper tubes. These will naturally deflate and fold
inwards.
Step 3
Once the top tubes have been deflated, climb up the ladder and neatly place all the
material on top of the platform. The neater you do this, the easier folding will be.
Step 4
Remove the ladder and repeat the deflation process for the base. To deflate the
base, push and turn the inflation valve.
Do this for both valves for faster deflation. There is one located on each end of the
platform.
Step 5
Once deflated, fold the two LONGEST sides over into the centre so there is no extra
material bulging over the edges of the metal base and secure with the attached
2 buckles.
Then fold the two SMALLER ends in to the centre and secure with the attached
buckle.
Please keep in mind when folding the platform, to always fold flat and avoid any kinks
or twists in the base.
Step 6
Fold the ladder and place in the centre of the packed tent, or you may place it in
between one of the folded layers.
Step 7
Zip the cover on.