1. Remove the mouth tip from the cartridge by pulling and twisting it away
from the cartridge.
2. Break apart the dry herb into small pieces using your hands or with a
grinder. Finely ground herbs will result in larger puffs and allow your herbs to
burn evenly.
3. With the mouth tip removed, drop the herb into the cartridge one pinch at
a time. Be careful not to push the heating coil down. Be gentle and try to
move the coil as little as possible when filling or emptying it to avoid
damaging it. Pack the herb down by tapping the cartridge on a hard flat
surface. The herb will fall and settle comfortably around the heating coil.
Repeat this step until your cartridge is roughly 70% full. You don’t want herb
above the heating element because it won’t burn evenly if that happens. Make
sure you don’t pack the herbs too tightly as it will make it difficult to remove
leftover dry herb after use.
Filling the Dry Herb Cartridge
12
