IMPORTANT: Dry Herb cartridges are an optional upgrade when
purchased online and are NOT INCLUDED in the Ambassador Kit.
1. Remove the mouth tip from the cartridge by pulling and twisting it away from
the cartridge.
2. Break apart the dry herb into small pieces using your hands or with a grinder.
Finely ground herbs will result in larger puffs and allow your herbs to burn evenly.
3. With the mouth tip removed, drop the herb into the cartridge one pinch at a
time. Be careful not to push the heating coil down. Be gentle and try to move the
coil as little as possible when filling or emptying it to avoid damaging it. Pack the
herb down by tapping the cartridge on a hard flat surface. The herb will fall and
settle comfortably around the heating coil. Repeat this step until your cartridge is
roughly 70% full. You don’t want herb above the heating element because it won’t
burn evenly if that happens. Make sure you don’t pack the herbs too tightly as it
will make it difficult to remove leftover dry herb after use.
Filling the Dry Herb Cartridge
14
