EN
Instructions Manual - CLINIC SW-M2000
© Gentilin SRL - 50101031.09.20
6
and 40°C (50°F and 104°F). Always check to insure the chosen location is protected
from direct or indirect moisture contact.
IMPORTANT!
This semi-wet suction system is Class 1 Equipment and shall to be installed by
qualified personnel.
Never operate this product if it has a damaged power cable or plug. If it is not working
properly, has been dropped, damaged or has fallen into water, please contact the
appropriate service center for inspection and repair.
Keep the power cable away from heated surfaces. All electrical products generate
heat. To avoid serious burns, NEVER touch suction motor during or immediately after
operation. The temperature to suction motor can reach 120°C.
Never block any air exhaust valve or position the device on a soft surface where the
openings may be blocked. The air exhaust valve is for ventilation of the motor inside
the housing. Keep the air exhaust valve free of lint, dirt and other foreign objects.
Use only in well-wentilated areas. Be sure to properly identify intake and discharge
ports before using machine.
Do not disassemble. Disassembly or attempted repairs if done incorrectly can create
electrical shock hazard or product damage. Defer servicing to qualified service
centers only.
Do not use this product in or near areas where it may fall or be pulled into water or
other liquids. Do not reach for this product if it has fallen into liquid. Never operate this
product outdoors in the rain or in a wet area.
INSTALLATION
Suction Inlet Hose Connection
www.gentilinair.com - PROPRIETA' RISERVATA "GENTILIN" S.r.l. - A TERMINI DI LEGGE E' VIETATO RIPRODURRE O COMUNICARE A TERZI IL CONTENUTO DI QUESTO DISEGNO
01/09/2020
UPDATE
CODE
www.gentilinair.com - PROPRIETA' RISERVATA "GENTILIN" S.r.l. - A TERMINI DI LEGGE E' VIETATO RIPRODURRE O COMUNICARE A TERZI IL CONTENUTO DI QUESTO DISEGNO
01/09/2020
UPDATE
CODE
