USER GUIDE COPYRIGHT
©
2012 GENTHERM
FCC Compliance
The remote device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference with a
residential installation. This equipment generates uses and can radiate frequency
energy and, if not installed and used in accordance with these instructions, may
cause harmful interference to radio communications. There is no guarantee that
interference will not occur in a particular situation. If this equipment does
interfere with TV or radio reception, which can be determined by turning the
device on and then off, the user is encouraged to try to correct the interference
by one or more of the following measures:
x
Reorient or locate the receiving antenna.
x
Increase the separation between the equipment and receiver.
x
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
x
Consult the dealer or an experienced radio/TV technician for help.
Modifications made to the product, unless expressly approved by
Gentherm, could void the user’s authority to operate the equipment.
CAUTION: Exposure to Radio Frequency Radiation.
Antenna shall be mounted in such a manner to minimize the potential for human
contact during normal operation. The antenna should not be contacted during
operation to avoid the possibility of exceeding the FCC radio frequency
exposure limits.
The Climate Control Sleep System conforms to UL Standard 962 test
requirements.
x
Climate Control Sleep System utilizes 100-240VAC, 47-63Hz, 4A
x
Manufactured by Gentherm
x
Electronics made in China
x
For household/residential use only.
3
