HomeLink Buttons
(1, 2, & 3)
AUTO-DIMMING MIRROR QUICK REFERENCE
HOMELINK FEATURE
The HomeLink Wireless Control System provides a convenient way to replace up to three
handheld radio-frequency (RF) transmitters used to activate compatible devices such as
gate operators, garage door openers, entry door locks, security systems, and home lighting.
NOTE: HomeLink will only work while the vehicle ignition is in the ON position
for this vehicle configuration.
OPERATING THE HOMELINK FEATURE:
1. Press and release one of the HomeLink buttons (1, 2, or 3) that have been programmed.
2. The HomeLink indicator will operate as below:
- Indicates green and is continuously ON (Fixed Code Garage Door Opener)
- Flashes in green rapidly (Rolling Code Garage Door Opener)
ERASING A HOMELINK BUTTON:
To erase memory, press and hold the two outer HomeLink buttons (“1” & “3”). The HomeLink
indicator will turn continuously ON for about 10 seconds. Release only when the Green
indicator light begins to flash rapidly. Now the HomeLink button memories are cleared.
PROGRAMMING THE HOMELINK FEATURE:
NOTE:
For best results and step by step directions:
• Visit the HomeLink web site at:
www.homelink.com
• Scan the QR code to the right
• Call HomeLink customer support at
1-800-355-3515
Two-Way
FIG. 1
AUTO-DIMMING FEATURE
During nighttime driving, this feature will automatically detect and help eliminate annoying
rearview mirror glare. The auto-dimming feature defaults to the ON position each time the
vehicle is started.
ADJUSTING THE MIRROR
Before you start driving, adjust the rearview mirror to provide a clear view through the
center of the rear window.
CLEANING MIRROR
When cleaning the mirror, use a paper towel or similar material dampened with glass
cleaner. Do not spray glass cleaner directly onto the mirror as damage to internal circuitry
may result.
THROUGH GLASS INDICATORS
The HomeLink indicator is an example of a “through glass” indicator. When not in use, this
item will not be visible, as it is behind the reflective surface. When illuminated it will become
visible, through the glass.
Before programming HomeLink to a garage door opener or gate operator,
make sure that people and objects are out of the way of the device to
prevent potential harm or damage. When programming a garage door
opener, it is advised to park outside of the garage.
Do not use HomeLink with any garage door opener that lacks safety stop and reverse
features as required by U.S. federal safety standards (this includes any garage door
opener model manufactured before April 1, 1982). A garage door that cannot detect
an object signaling the door to stop and reverse - does not meet current U.S. federal
safety standards. For more information, contact HomeLink at
www.homelink.com
,
or call HomeLink customer support at
1-800-355-3515
.
It is also recommended that a new battery be replaced in the hand held transmitter of
the device being trained to HomeLink for quicker training and accurate transmission of
the radio frequency.
HomeLink® and the HomeLink House® logo are registered trademarks of Gentex Corporation.
The myQ® logo is a registered trademark of The Chamberlain Group, Inc.
FEATURING:
AUTO-DIMMING MIRROR QUICK REFERENCE
