GENPOWER GXS14000 User Manual Download Page 23

Page: 23 / 33

Commercial Diesel Generator

E&OE

To change the engine oil:

1. Place the machine on a suitable work surface that is flat and level and have a container ready to catch

drained oil.

2. Clean the machine around the oil drain plug (

) and oil filler cap/dipstick so that no dirt or other material

enters the engine when the plug or cap is removed.

3. Unscrew (rotate left) and remove the drain plug and washer.

4. Tilt the machine and drain all oil from the engine. Once drained, allow the machine to sit level again. For

engines with an

oil strainer

, clean it.

5. Clean the drain plug and washer and then reinstall them. Screw in fully (rotate right) and firmly tighten.

6. Remove the oil filler cap (rotate left) until fully unscrewed. Wipe the oil level indicator clean with a piece

of cloth or paper.

7. Using a funnel, carefully add oil to the engine until the "maximum" level is reached. Double-check the oil

level (described above).

8. When finished, re-install (rotate right) the oil filler cap until firm. Wipe off any residual oil from the

machine.

Oil Strainer

Some engines feature an oil strainer that can be removed for
cleaning / replacement:

1. Ensure the engine is drained of oil.

2. Clean the machine around the oil strainer (

3. Remove the oil strainer retainer retaining bolt (

4. Pull the oil strainer from the engine and clean it thoroughly

in solvent or degreaser. Ensure that all particles, sludge etc
is removed, then dry it.

5. When finished, slide the oil strainer back into position. Re-

install and tighten (rotate right) the retaining bolt. Wipe off
any residual oil from the machine.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

Summary of Contents for GXS14000


































Search results

Summary of Contents for GXS14000

Reviews:

GENPOWER GXS14000, User Manual, Page: 23 / 33

Search results

Summary of Contents for GXS14000

Reviews: