Genmitsu 3018-PROVer, User Manual

Page: 31 / 104

29
The offline interface is designed according to our offline controller and does not match with other companies' offline
controllers.Do not connect other devices or controllers, or risk damaging the control board or other devices.
Part 7- Offline Controller
1. Button Functions Introduction
X- X+
Z+
Z-
Y-
Y+
Marker
STEP
Select
Enter
X+
X-
Y+
Y-
Z+
Z- X+move, parameter modification (in setting state)
X-move, parameter modification (in setting state)
Y+move, parameter modification (in setting state)
Y-move, parameter modification (in setting state)
Z+move
Z-move
Save/confirm/pause/start/return to main interface (long press),
release (long press) limit switch to trigger alarm
Move cursor
Instruction
Manual moving distance option (xC, x0.01, x0.1, x1) in xC mode,
press the key to keep moving; x0.01 means press the manual
button once and the machine moves 0.01mm; x0.1means press
the manual button once and the machine moves 0.1mm;
x1 means press the button once and the machine moves 1mm;