GENMAX GM5500i, User Manual

Page: 9 / 33

8
CONTROL FUNCTIONS
①
120-Volt, 20-Amp Duplex Outlet (NEMA 5-20R):
The outlet is capable of carrying a maximum of 20
amps.
②
USB Duplex: 5V DC that come in 1 amps and 2.1
amps.
③
AC Reset: If the inverter is overloaded, the reset
breaker will trip. The engine will continue to run, but
there will be no output from the inverter. Unplug the
devices and reduce the load. Push in the reset
breaker to reset it.
④
Efficiency Mode Switch: When turned to the ON
position, the engine will sense the load needed and
run at a slower RPM to save fuel.
⑤
Ground Terminal: The ground terminal is used to
externally ground the inverter.
⑥
Multifunction Digital Display Meter: Yellow light
means that the amount of oil is too low, red light
means that the machine overload, green light means
normal operation; Power display on the left, oil level
display on the right; Rolling display mode,
respectively display accumulative running time, output
voltage, frequency rolling display mode.
CONTROL PANEL FEATURES GM5500i
AC 120V
NEUTRAL FLOATING
AC 120V
NEUTRAL FLOATING
AC BREAKER
AC BREAKER
CIRCUIT BREAKER
ON
OFF
AC 120V/240V
NEUTRAL FLOATING
AC RESET CO ALARM ECO.SW.
DC 5V 1A/2.1A
SYSTEM FLOATING
10
11
⑦ AC Breaker: If the inverter is overloaded, the
reset breaker will trip to block current.
⑧
Engine Switch: Control the operation and
shutdown of generators.
⑨ CO Alarm: Flashing red light: dangerous levels
of carbon monoxide gas have built up leave
immediately until area has aired out. Move
generator to well-ventilated area before
operation. Flashing yellow light: carbon monoxide
sensor malfunction. Sensor needs service.
⑩
120-Volt, 30-Amp Outlet: The outlet is capable of
carrying a maximum of 30 amps.
⑪ Circuit Breake: A circuit breaker interrupts the
current when the whole circuit is overloaded.