4
1. Open the package and take out the treadmill.
Make sure there are no missing parts:
◼
one main treadmill frame
◼
one accessory bag set
2.Take out 4 short screws and pads from spare bag, fix left and right upright tubes with b
ase frame by the screws. Please do not fasten the screws before finish assembling.
3.Take out 2 long screws and pads, fix panel with upright tubes with the screws. Then
fasten the screws of above point 2 mentioned. Then put the cover to armrest. Before
fasten screws, please make sure the cables in the upright tube will not pressed by
screws.
4.Fix the panel at a suitable angle with M6 knob and plastic gasket,then put the safety key
on the panel.
5.Fix M16 knob to left upright tube, fix running frame with base tube by M12 knob.
6.Finished.
6
. Control Panel
