T
。。
Is:
。
10, 13,17mm Wrench 1PC
Step 5
Installing the Right Handlebar:
5A. Install the Right Handlebar (GR) onto the right side of the Rear Frame
(8)
with肌／
0
s
。
cket
Hex B
。
Its (20), four Flat Washers (19), and two Cap Nuts (24).
NOTE: The Cap Nuts (24) should be installed on the outward facing side of the frame.
58. Install two Flat Washers (16) and two
s
。
cket Head B
。
Its (15) from the rear of the back
side of the Rear Frame
(8)
and into the Right Handlebar (GR).
SC. Tighten the hardware using the 6mm Allen wrench and the 10, 13, 17 mm Wrench
provided.
Hardware:
＠
凶
(19) Flat Washer
4PCS
(24) Cap Nut
2PCS
@)
(16) Flat Washer
2PCS
(20) Socket Hex Bolt
2PCS
(15) Socket Hex Bolt
2PCS
10
Summary of Contents for H003A
Page 4: ...1VERVIEW DRAWING 3...
