Start-up and shutdown
Start-up
Put the drone right side up, toggle the switch to "ON" until the LED indicator on top of the front camera flashes twice to let
the "Follow" enter the start-up self-inspection. After about 20 seconds, when the electrical tune rings and the start-up
self-inspection is completed, put the "Follow" drone on the level ground to wait for the drone's electrical tune ringing again,
following which the drone enters the preparation state for flight.
Shutdown
Under the standby state, toggle the switch to "OFF" until the LED power indicator on top of the front camera is off.
Standby
When the "Follow" drone is in the flight preparation state, the LED indicator on top of the front camera is normally on,
which means that it can be released to fly at any time. After 10-minute standby, the "Follow" drone will automatically enter
the dormant state.
Note:
* After the start-up, the "Follow" drone will conduct the self-inspection; if there is a fault, after the self-inspection,
the DRONE electrical tune won't ring, which means that the self-inspection fails. You can try to restart the
"Follow" drone. Don't try repeatedly; if the fault still exists, please contact the customer service.
