English
8
3.2 Choosing your video source
Four buttons on the left side of the interface allow you to choose your source.
Air TV
: Use this to receive your TV signal through a broadcast antenna.
Cable TV
: Use this to receive your TV signal via cable.
AV IN
: Use this when an external device using Composite Video is connected to
TVGo-U202.
S-Video
: Use this when an external device using S-Video is connected to TVGo-U202.
3.3 Channel and volume buttons
On the right side of the interface you will find the channel buttons; use these to change
channels. With the +/- buttons, located at the bottom of the channel number panel, you
can add or delete a tuned channel from your Channel List. (See sections 3.5.1 and 3.5.5)
You can also find the volume bar in the middle of the interface. Click on the + or - to
increase or decrease the volume, or click anywhere on the volume bar to set the volume
at that level. Click on the speaker icon at the left to mute the volume.
3.4 Info panel
The above image shows the info panel. The top part of the info panel shows you the
current channel you are tuned in to and the current time. If you are in record mode, the
“
REC
” button will be lit. Use the arrows to change the channel up or down.
The bottom part of the info panel shows the file size of what you are currently recording,
how long you have been recording, and your current video source.
