![background image](http://html1.mh-extra.com/html/genius/p635/p635_manual_2212829016.webp)
English
-16-
Installing and Removing the Battery
We highly recommend using specified rechargeable lithium-ion battery (3.7V,
600mAh) to fully demonstrate this camera’s function.
Charge the battery before using the camera. Make
sure that the power of the camera is off before
inserting or removing the battery.
Inserting the Battery
1. Open the battery/SD card cover.
2. Insert the battery in the correct orientation shown.
Tilt the battery lock lever in the direction of the
arrow and orient the battery so that its label is faces to the rear side of the
camera, and then insert the battery.
3. Close the battery/SD card cover.
Removing the Battery
Open the battery/SD card cover and then release the battery lock lever. When the battery
has come out a little, slowly pull it out the rest of the way.
Charging the Battery
Using the charger may charge the battery or operate the camera as power supply.
Make sure that the power of the camera is off and then insert the battery before
starting.
1. Place the battery in the charger.
2. Connect the power adaptor to a
wall outlet.
Charging time differs
depending on the ambient
temperature and the status
of battery.