Hardware Installation
Note: Before installing or removing the mouse to or from your computer, always re-
member to turn off your computer. Installing or removing the mouse when your com-
puter is running will cause permanent damage to the mouse or your computer.
1.
For PS/2 model, you can connect the mouse to the PS/2 port.
2.
For the USB model, connect your mouse to the USB port on your computer.
3.
For the USB & PS/2 model, you need to use the 6-pin PS/2 adapter.
4.
Turn on your computer.
Warning:
Please do not use this optical mouse on a desk which is made of glass, mir-
ror, iron, or black velvet. Also, a flat surface is necessary or the Optical Sensor will
not work properly.
Software Installation
Installing the MouseMate software
1.
For PCs, start Windows, insert the software CD into the computer’s CD-ROM
drive, then follow the on-screen instructions.
(If Autorun is not enabled, select
Run from the Start Menu on the Taskbar. Next, type D:\Setup.exe, where D: is
the designation of the CD-ROM drive.)
2.
For the Macintosh, start the Macintosh operating system, insert the software CD
into the computer’s CD-ROM drive, find the Installer icon in the appropriate
language folder, double-click the icon, then follow the on-screen instructions.
Factory Settings
1
Hardware Installation
ENGLISH
