Important: You can use the battery charger receiver to recharge two AA or two
AAA rechargeable batteries each time you use the PC. Plug the battery charger
receiver USB connector into the PC directly and remember do not put the batteries
in the wrong direction, use the same types of batteries, and do not recharge via the
USB hub, that will make your receiver, main-board and hub burn or become
non-usable easily. Also, keep all drinks away! If any spill occurs on the receiver,
unplug the USB connector first and clean the receiver immediately. Please remove
the batteries if you do not use this device for at least two weeks.
Warning: (Troubleshooting)
1.
Please do not use the wireless optical mouse on a desk that is made of glass,
mirror, iron, or black velvet. Also a desk that is made of metal will reduce the
receiving distance of the keyboard and mouse.
2.
Before the first installation is completed (channel setting ready), the keyboard
will not work in DOS. If your USB keyboard does not work in BIOS, DOS or
Windows, then use another PS2 keyboard to make the USB controller (USB
function) and USB legacy (USB keyboard) “On” in the BIOS setup. This may
occur with older BIOS versions. Then unplug the PS/2 keyboard and plug in
your USB keyboard and everything should be working properly.
3.
The Wireless TwinTouch LuxeMate Pro channel provides 256 ID-codes, and it
automatically selects the ID # for your keyboard and mouse. You can only set up
one Wireless TwinTouch LuxeMate Pro at a time. But if you have additional
Wireless TwinTouch LuxeMate Pro sets in an area of 10 square meters, more in-
terference may occur between the receiver and your keyboard and mouse.
4.
The Wireless TwinTouch LuxeMate Pro with radio frequency gives you free
movement and an enjoyable experience. For optimal performance, place the re-
ceiver at least 8 inches (about 20 cm) away from the mouse and other electrical
devices, such as the computer, monitor, and etc.
2
