![background image](http://html1.mh-extra.com/html/genius/gx2440/gx2440_user-manual_2212657005.webp)
8
88
and the Charge LEDs will illuminate (depending on the
health of the battery) indicating the charging process
has started.
6.) The charger can now be left connected to the battery
at all times to provide maintenance charging.
Connecting to the Battery.
Do not connect the AC power plug until all other connections
are made. Identify the correct polarity of the battery terminals
on the battery. The positive battery terminal is typically
marked by these letters or symbol (POS,P,+). The negative
battery terminal is typically marked by these letters or symbol
(NEG,N,-). Do not make any connections to the carburetor,
fuel lines, or thin, sheet metal parts. The below instructions
are for a negative ground system (most common). If your
vehicle is a positive ground system (very uncommon), follow
the below instructions in reverse order.
1.) Connect the positive (red) battery clamp or eyelet terminal
connector to the positive (POS,P,+) battery terminal.
2.) Connect the negative (black) battery clamp or eyelet
terminal connector to the negative (NEG,N,-) battery terminal
or vehicle chassis.
3.) Connect the battery charger’s AC power plug into a
suitable electrical outlet. Do not face the battery when making
this connection.
4.) When disconnecting the battery charger, disconnect in the
reverse sequence, removing the negative first (or positive first
for positive ground systems).
Begin Charging.
1.) Verify the voltage and chemistry of the battery.
2.) Confirm that you have connected the battery clamps or
eyelet terminal connectors properly and the AC power plug is
plugged into an electrical outlet.
3.) The charger will begin in Standby mode, indicated by an
orange LED. In Standby, the charger is not providing any
power.
4.) Press the mode button to toggle to the appropriate
charge mode (press and hold for three seconds to enter an
advanced charge mode) for the voltage and chemistry of
your battery.
5.) The mode LED will illuminate the selected charge mode
User Interface
Mode Button
Standby LED
Charge Level LEDs
Mode LEDs
Charge LEDs
Error LED