Hardware Installation
1.
You can connect the receiver to a USB port of a PC
2.
Install two AAA batteries in the mouse.
3.
Turn on your computer.
4.
After you open Windows, please press the button on the receiver first and then
press the button under the mouse for channel setting.
Important: Remember do not put the batteries in the wrong direction, use the same
types of batteries. Also, keep all drinks away! If any spill occurs on the receiver,
unplug the USB connector first and clean the receiver immediately. Please switch the
button to "off" under the mouse if you don't use it for a long time, and remove the
batteries if you do not use this device for at least two weeks.
Warning: (
Troubleshooting)
1.
Please do not use Wireless Mini Navigator on a desk which is made of glass,
mirror, iron, or black velvet. Also, a flat surface is necessary or the Optical Sen-
sor will error easily. When you use Wireless Mini Navigator on a desk that is
made of metal, try using a pad and reduce the receiving distance.
2.
Before the first installation is completed (channel setting ready), the mouse will
not work in DOS.
3.
The Wireless Mini Navigator channel provides 256 ID-codes, and it automati-
cally selects the ID # for your mouse. You can only set up one Wireless Mini
Navigator at a time. But if you have additional Wireless Mini Navigator sets in
an area of 10 square meters, more interference will occur between the receiver
and your mouse.
1
ENGLISH
