Genius G-Shot P533, Service Manual

Page: 7 / 16

Service Manual G-Shot P533
3. Disassemble Procedure
Step Figure Description Remark Tools
1
Finished Product
Examine if there's
any scratch on the
surface.
2
Remove all the screws
on the camera housing
then remove the Front
Cover and Rear Cover. Do not scratch the
camera surface
while removing
the screws.
Screw driver
3
Remove the screws on
the SW PCB.
Screw driver
4
Disconnect the FPC
from SW PCB.
Tweezers
5
Disconnect the FPC of
LCD from SW PCB.
Tweezers
6
Desolder the joint of
plate.
Iron soldering
7
Disconnect the FPC of
LCD from SW PCB.
Tweezers
Disasse
mble
pr
oc
edur
es
Version: K01A 7