![background image](http://html1.mh-extra.com/html/genius/dv610/dv610_manual_2212671010.webp)
English
-6-
(2)
When charging the battery, the self-timer LED light keeps blinking. The LED
light will stay on after the battery charge’s complete.
(3)
It takes three hours to fully recharge the battery each time.
Inserting and Removing a SD Card
The Digital Video Camera comes with 16 MB built-in memory which allows you to
store pictures, movies, recorded voice and music. You can expand the memory
capacity by using an optional SD or MMC memory card up to 512MB. To insert a
memory card, refer to the figure above and:
1. Open the battery/SD card cover.
2. Insert the memory card until it locks into position.
To remove an installed SD card, press the card inwards to release it.
When the card pops out, gently remove it from its slot.
NOTE
When a memory card is installed, movies and pictures are saved on the card
rather than in the built-in memory.
Protecting Data on an SD Card
The SD card is read-only by locking the SD card.
No pictures, movies and voice can be recorded
when the SD card is locked.
Make sure the lock is
in writeable position before recording any media.
To prevent valuable data from being
accidentally erased from an SD memory
card you can slide the write-protected tab (on the side of the SD memory card)
to “LOCK”.
Please format an SD memory card by this Digital Video Camera before use.