English
-11-
Writeable position
Write-Protected
Position
Writeable position
Write-Protected
Position
Getting Up and Running
Loading the Battery
Before using the camera, you must load two
AA (Alkaline) batteries.
1. Follow the arrow direction and slide to
reject the battery cover.
2. Insert the batteries according to the
correct polarity marks ( + or -)
3. Close the battery cover firmly.
Inserting and Removing an SD Card
The camera comes with internal memory which allows you to store pictures, movies,
recorded voice and music. You can expand the memory
capacity by using an optional SD or MMC memory card up
to 2GB. To insert a memory card, refer to the figure as
below:
1.
Insert the memory card into the right position.
2.
To remove an installed SD card, press the card
inwards to release it.
3.
When the card pops out, gently remove it from its
slot.
NOTE
z
When a memory card is fitted, movies and pictures are saved on card rather than on the
built-in memory.
Protecting Data on an SD Card
SD card is read-only by locking the SD card. No
pictures, movies and voice can be recorded when the
SD card is locked. Make sure the lock is on writeable
position before recording any media.
Eject
