ENG
TYPE SPECIFICATIONS
TECHNICAL SPECIFICATIONS
· Battery 3V (CR2450)
· Transmitting frequency: 433MHz
· Transmitting power: 10 mW
· Operating temperature: -10°C ÷ 50°C
· Transmission distance: 200m open office,
35m on two walls
OPERATING INSTRUCTIONS
Warning: to ensure long transmitter life, do not expose to
moisture or shocks.
When using transmitter, if emission distance is obviously too
short or less sensitive than normal, please replace battery.
Dispose of used batteries appropriately.
MATCHING AND SETTING UP TUBULAR MOTOR
The matching operations between emitter and tubular motor are
detailed in each motor instructions.
During setting, the time between two operations must be shorter
than 4s, otherwise the device will quit the setting program.
Motors powered by electrical grid either directly or through a power
supply unit contain a buzzer.
A beep sounds to confirm each step in programming. When the
power supply is applied, the buzzer emits a long sound confirming
connection.
Instead, each stage in programming of battery-operated motors is
confirmed by motor turning briefly forward and back.
Power on
Beep once
(or motor turning
briefly forward
and back)
Set up is ok.
The up button controls
the motor clockwise
Set up is ok.
The down button
controls the motor
clockwise
Beep once
(or motor turning
briefly forward
and back)
P2X1
P2X1
UpX1
DownX1
OK
OK
Beep once
(or motor turning
briefly forward
and back)
Beep once
(or motor turning
briefly forward
and back))
Up button
Stop button
Down button
Back
P1- Channel
set button
Setting button
P1+ Channel set
button
SELECTING VALID CHANNELS
(In setting mode, press the up
or down button so you can quit
quickly; reset if you want to
change the valid channels)
C
P1+ button
+
P1- button)×1
P1+ button
+
P1-
button, hold
The screen
will display “C”
The screen will
display “15”
Press P1+ button or P1- button,
selecting the channel (channel
1 to channel 15) you need
StopX1
The screen will
display “o”
Setting is ok
OK
15 channel emitter specifications
CRH-15-00
