Gen
i
us Gate Systems Ltd
4 Wayside Green Woodcote Reading Berks RG8 0QJ
Mail@Genius-Systems.co.uk
Directors: D.M.Pearson. M.J.Thornton. J.A.Pearson
Registration No: 4557960 (England)
V.A.T.No: 815 9757 88
Page 4
Diagrams are attached for a 2 button system for two of the most common panels. Please contact us if
you have a different panel and we will advise on compatibility.
4. Test the system
Check all connections and once satisfied power up the DMG1and the Gate panel.
The Status indicator will start to flash quickly as the GSM unit tries to register with the network.
Once registration is complete the indicator will flash slowly.
NOTE the DMG will take approximately
60 seconds to complete its internal checks and read the data stored on the SIM before it will respond.
With a mobile phone (or landline) call the phone number issued with the SIM. The DMG will answer
the call after 3 or 4 rings and issue a simple Dit-Dit-Dit Dee sound to the caller. The call will hold for
about 30 seconds as the internal countdown timer runs out, during which time the caller can operate
the relays by pressing button1 on the phone for relay 1, button 2 for relay 2 and so on. Each button
press will reset the countdown time to 30 seconds run time. Successful relay operation results in a
Dit-Dit-Dit-Dee sound being issued. The sound for relay 2 however also indicates the status of the
relay. Being a Dit-Dit-Dit-Dee-Dee as the relay closes and a Dit-Dit-Dit-Doh-Doh as it opens.
Let the call drop once proper operation is established and initiate outbound calls by pressing the gate
buttons to call the target numbers loaded into the SIM earlier. Once again check for proper
operation. The Call forwarding will issue a beep when it activates and the current call will drop and
the alternate will set itself up. If there is no alternate the call forward trigger will reset to the first
number call when the trigger time is reached. It will not trigger a second time.
Version 3.2
October2008
