3.
Entre your 2.4Ghz Wi‐Fi name and password, (make sure Wi‐Fi name doesn’t end with ‐5G)
Follow the APP instruction carefully to complete the network pairing process.
if the fast‐blinking method (EZ method, mentioned above) doesn’t work, please try the slow blinking (AP
method) below.
While the strip light is rapidly blinking, press and hold the pairing button on the Wi‐Fi controller again and then
wait for the light to start
blinking slowly (1 blink per every 2 seconds)
1.
open up the Mirabella genio APP, tap on
+
,
add Manually
then choose
genio strip light
from the list
Entre your 2.4Ghz Wi‐Fi name and password, (make sure the Wi‐Fi name doesn’t end with ‐5G)
then in
reset the device first
screen tap on
EZ mode
in the Top right hand corner just below the battery image,
select
AP Mode
(refer to the 1st and 2nd image below) Now
Confirm indicator slowly blinking
(refer to image 3),
hit
Next
, then
Go to connect
and connect to Wi‐Fi named SmartLife_XXXX
Note: If you fail to see Wi‐Fi name beginning with the word SmartLife_XXXX, then mean the device is
not slowly blinking, please reset and make it slowly blinking