background image

Quick Start Guide

2 Channel Wiegand Radio Receiver - Up to 30m

4

The Genie WRR-2 is a 2 channel long range Wiegand radio receiver that allows interface
with a wide range of electronic access control systems by complying with the Wiegand 
communication protocol.

1.1 Product Features

•  MAXSecure™ - Unique security feature
•  Wiegand output interface
•  ETL listed - Independently tested and
•  certified to conform to UL Standard 294 
•  Wall mount box for box or flat surfaces
•  Electronics sealed in a weather resistant enclosure (IP65)

1.2 Product Layout

a. 6-PIN Terminal Block

1.3 Specification

Frequency

433MHz

Transmission

Rolling code and encryption

IP Rating

IP65

Voltage

DC12V (Nominal)

Current Draw

80mA typical @ DC12V

Read Range

Up to 30m (Installer adjustable)

Cabling

24 AWG minimum, multi-conductor stranded with an overall foil shield

Interface

Wiegand (26 Bit industry standard and custom Wiegand formats)

Audio Tone

N/A

LED

External four-state standard (red, green, amber, and off), Power (blue), and 

Channel (green)

Operating Temperature

-40°C to +65°C, 5-95% RH (Non-condensing)

Certifications

FCC, ICC, CE, UL Standard 294

Dimensions

84 x 84 x 48.3 mm

Weight

227g

Summary of Contents for WRR-2








Reviews: