6
This series of the product supports 8 SATA hard drives. Please make sure that the device is
powered off before the installation. The pictures of the installation are for reference only.
1. Remove the cover and loosen the screws to take out two mounting bars.
2. Fix the HDDs on the mounting bar.
3. Install the mounting bar with HDDs back to the device (It is recommended to install the
copper-pillar provided incase the HDDs are damaged by external force).
4. Connect the power and data cables.
5. Install back the cover and secure it with the screws.
Note: Please check the inside structure of the device and make sure that the cables are
connected well before installing the cover back. Please format the HDD before using.
2.0 HDD Installation