Quick Start Guide
4MP H.265 IP IR Vandal Dome with 2.8-12mm Auto Focus Lens and Facial Recognition
10
6. Insert a micro SD card. After that, adjust Zoom or Focus to obtain an optimum image.
Before adjustment, view the image of the camera on a monitor. For Type A, press the T
or W button. For Type B, (a) push the IR light hood to the position, (b) remove the lens
cover, (c) adjust the Zoom and Focus, (d) install back the lens cover and move the IR
light hood back.
7. Install the lower dome back to the camera and fix it with screws. Then put the trim ring
onto the lower dome and then rotate it clockwise until it is locked. Finally, remove the
protection film softly.
3.2 Installing the Camera with a Junction Box
1. Fix the junction box to the wall with screws.
2. Rotate the trim ring anticlockwise to remove it from the camera and then loosen the
screws to open the lower dome.
3. Route and connect these cables (take side conduit cabling for example). Then fasten
the camera to the junction box with screws.
4.
Insert a micro SD card. Then
adjust the view of angle and the
image.
5. Install the lower dome back to the camera and fix it with screws. Then put the trim ring
onto the lower dome and then rotate it clockwise until it is locked. Finally, remove the
protection film softly.
Lens Cover
Focus
Monitor
Zoom
Zoom-
Zoom+
IR Light Hood
Insert a Micro
SD card
Type A : Motorised Zoom Camera
Type B : Manual Zoom Camera
