23
Network Camera User Manual
2. Click “Enable” and set the alarm holding time.
3. Set alarm trigger options. Trigger alarm out, Email and FTP. The setup steps are the same
as motion detection. Please refer to
chapter for details.
IP Address Conflict
1. Go to Config
Alarm
Anomaly
IP Address Collision as shown below.
2. Click “Enable alarm” and set the alarm holding time.
3. Trigger alarm out. When the IP address of the camera is in conflict with the IP address of
other devices, the system will trigger the alarm out.
Cable Disconnection
1. Go to Config
Alarm
Anomaly
Cable Disconnected as shown below.
