High Resolution 700TVL Cameras
34
Camera Dimensions
7. W96MDW
Ȱ
110
Ȱ
80
Ȱ
110
85m
m
45m
m
Troubleshooting
Problem
Possible Cause
Nothing appears on the screen.
• Check the power cable, power supply output
and video connection between the camera and
monitor.
The image on the screen is dim.
• Are the camera lens or the lens glass dirty?
(Clean the lens / glass with a soft clean cloth)
• Adjust the monitor controls, as required.
• If the camera is facing a very strong light,
change the camera position.
• Adjust the lens focus.
The image on the screen is dark.
• Adjust the contrast control of the monitor.
• If there is an intermediate device, correctly set
the 75 Ω/Hi-z.
The camera is not working properly and the sur-
face of the camera is hot.
• Check the camera is correctly connected to an
appropriate regulated power source.
Motion Detection is not activated.
• Has MOTION DET been set to ON in the
menu?
• Has MD AREA been properly defined?
The colour of the picture is not correct.
• Check the settings in WHITE BALANCE menu.
The image on the screen flickers.
• Make sure that the camera isn’t facing direct
sunlight or fluorescent lighting. If necessary,
change the camera position.
The SENS UP does not work.
• Check that the AGC setting in the EXPOSURE
menu isn’t set to OFF.
• Check that the EXPOSURE menu and make
sure SHUTTER is set to ------.
