Genie VRD73TDN User Manual Download Page 9

- 9 -

True Day/Night Vandal Resistant Dome Camera

Do not install the camera in

extreme temperature conditions.

Do not touch the front lens of the

camera.

Do not install or use the camera in an

environment where the humidity is high.

This can cause poor image quality

Never keep the camera pointed

directly at strong light.

Do not expose the camera to

radioactivity.

Do not install the camera under

unstable lighting conditions.

Do not drop the camera or subject

it to physical shocks.

Only use the camera under conditions

where temperatures are between 

-20°C and +50°C. Be especially careful to 

provide ventilation when operating under 

high temperatures.

This is one of the most important parts of 

the camera. Be careful not to leave

fingerprints on the lens cover.

It can damage the CCD

If exposed to radioactivity the CCD

will fail.

Severe lighting change or flicker can

cause the camera to work improperly.

It can cause malfunctions to occur

NOTE

* If the camera is exposed to
spotlight or object reflecting
strong light, smear or blooming
may occur.

* Please check that the power satisfies 
the normal specification before 
connecting the camera.

Precautions

Summary of Contents for VRD73TDN









































Reviews: