User Guide
First Edition • Third Printing
Introduction
Tech Pro™ Link
Part No. 1276689GT
Article I.
Intr oducti on
Important
Basic mechanical, hydraulic and
electrical skills are required to
perform most procedures. However,
several procedures require
specialized skills, tools, lifting
equipment and a suitable workshop.
In these instances, we strongly
recommend that maintenance be
performed at an authorized Genie
dealer service center.
Compliance
Contains:
FCC ID: 2AISP
-
1274140
IC:22906
-
1274140
FCC compliance:
This device complies with Part 15 of
the FCC Rules. Operation is
subject to the following two
conditions: (1) this device may
not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause
undesired operation.”
Changes or modifications not
expressly approved by Terex USA
LLC could void the user's authority
to operate the equipment.
ISED compliance:
This device complies with Industry
Canada license
-
exempt RSS
standard(s). Operation is subject to
the following two conditions: (1) this
device may not cause interference,
and (2) this device must accept any
interference, including interference
that may cause undesired operation
of the device.
RF exposure information:
Reported SAR value :0.11W/kg,
next to body. 0 mm
Technical Publications
Readers are encouraged to notify
Genie of errors and send in
suggestions for improvement. All
communications will be carefully
considered for future printings of
this and all other manuals.
Contact Us:
Internet: www.genielift.com
E-
mail:
Copyright
©
2017 by Terex Corporation
First Edition: Third Printing, August 2018
Genie is a registered trademark of Terex
South Dakota, Inc. in the U.S.A. and many
other countries.
“Genie
®
Tech Pro” and "SmartLink" are
trademarks of Terex South Dakota, Inc.
