Genie TDB-B100-2402 Replacement Download Page 2

Page: 2 / 7

2 of 4

7. Unplug iDCM harness from iDCM board and pull harness from keeper on mounting bracket. FIG. 3.

8. Remove 2 screws securing iDCM board mounting bracket to chassis. FIG. 3.

•

Note the lock down tab on bracket, slide bracket to the side to release bracket from chassis. FIG. 3, detail A

REMOVE/REPLACE iDCM BOARD ASSEMBLY

DETAIL- A

Bracket tab

Harness

Keeper

FIG. 3

Parts removed for clarity

Summary of Contents for TDB-B100-2402

Page 2: ...ket FIG 3 8 Remove 2 screws securing iDCM board mounting bracket to chassis FIG 3 Note the lock down tab on bracket slide bracket to the side to release bracket from chassis FIG 3 detail A REMOVE REPLACE iDCM BOARD ASSEMBLY DETAIL A Bracket tab Harness Keeper FIG 3 Parts removed for clarity ...

Page 5: ...HE INPUT POWER LINES PRIOR TO REMOVING THE MOTOR COVER WARNING ANY AND ALL REPAIRS MADE TO THIS UNIT MUST BE PERFORMED WITH THE DOOR DISCONNECTED FROM THE OPENER AND IN THE CLOSED POSITION Parts removed for clarity Antenna Retail Models 39343504195 03 2019 1 of 3 ...

Page 6: ...Parts removed for clarity 2 of 3 ...

Page 7: ...Durring reassembly Ensure that one of these screws is yellow 3 of 3 ...