Please follow installation steps as below:
Please check the following items before installation, if it is missing, please contact the dealer.
Ethernet Switch
1pc
Power
Adapter
1pc
AC
Power
Cable
1pc
Accessory
1pc
User
Manual
1pc
1) Turn off the power of all the related devices before the installation; otherwise the device would be
damaged;
)
)
4)
5)
6)
2 Connect PoE cameras with 1~8 downlink ports of product by Ethernet cable;
3 Connect
UPLINK
port
of
product
with
NVR or PC by Ethernet cable;
Connect power adapter;
Check if the installation is correct, equipment is in good condition, the connection is stable,then
power on for system;
Ensure the Ethernet equipment with power on can work properly.
Installaiton
Steps
Feature
1
2
Board
Diagram
Main
Function:
Ethernet
ports
and
1*gigabit
SFP
ports;
Compliance with standards: IEEE802
.
3
、
IEEE802
.
3u
、
IEEE802
.
3ab
、
IEEE802
.
3z
、
IEEE802
.
3X
、
IEEE802
.
3af
/
at;
PoE
Power
Supply
:
With
8x
gigabit PoE RJ45 ports, each port supports max. 30W PoE output,
whole machine reaches 120W PoE power output;
One
-
key
CCTV: Quickly achieve isolation
among
downlink
ports
vis
dial
switch, effectively
restrain network storm, improve network feature;
Protection
:
Support
6KV surge immunity, EFT testing standard;
Operation
Environment
:
Support
-
10
℃~
45
℃
wide
-
temperature
;
Operation: Plug&play, convenient to use, support desktop, wall-mounted installations
.
Provide
8*10/100/1000Base-T
Ethernet
ports(PoE)
,
1
*
10/100/1000BASE-T
Application
The transmission distance depends on the signal source and cable quality; standard Cat5e/6
Ethernet cable is strongly suggested for reaching the maximum transmission distance!
Notice
1) Device must be connected with lightning protection grounding; otherwise protection level will be
greatly reduced; please use above No.20 wire to connect the grounding terminal;
2) The device requires rebooting after the dial switch has been utilized.
Side
Board
Kensington Security Slot
Cat5
e
/
6
PoE PTZ Camera
PoE Camera
PoE Dome Camera
PoE Camera
LCD
NVR
Power
Router
8 P
orts F
ull G
iga
bit P
oE
E
the
rne
t S
witc
h
Back
Board
Front
Board
4口百兆以太网交换机
8 Ports Full Gigabit PoE Ethernet Switch
ing and other
occasions.
8 Ports Full Gigabit PoE Ethernet Switch
Ethernet access and PoE applications. It provides eight Gigabit downlink ports, one Gigabit uplink
Ethernet port, and one Gigabit optical SFP module slot. The eight downlink ports support 802.3af/at
standard and feature Max. 30W PoE power output of single port, Max. 120W of whole machine. The
device supports one-key VLAN which isolates the communication between downlink and uplink
ports. It can be widely used in security surveillance, hotels, schools, SMB engineer
is an unmanaged Ethernet switch designed for Gigabit
V1.0
CCTV-mode Toggle
Switch
Power
LED
Power
Port
PoE Downlink Ethernet Ports
Uplink
Ethernet Port
Uplink Optical Port
Grounding
8 Ports Full Gigabit PoE Ethernet Switch
User Manual
Notice
