ii
Intro Section
Please read this instruction carefully before operating the product and keep it for
further reference. All examples and pictures used here are for reference only.
The contents of this manual are subject to change without notice.
CAUTION:
•
A regulated DC12V 300mA power supply is recommended for use with this
camera for the best picture and the most stable operation. An unregulated
power supply can cause damage to the camera and the product warranty will
be void.
•
It is recommended that the camera be used with a monitor that has a CCTV
quality 75Ω video impedance level. If your monitor is switched to high
impendance then please adjust accordingly.
•
Do not attempt to disassemble the camera to gain access to the internal
componets. Refer servicing to your distributor.
•
Never face the camera towards the sun or any bright or reflective light. It may
cause a smear on the picture and possible damage to the image sensor.
•
Do not remove the serial sticker for the warranty service.
•
Do not expose the camera to rain or other types of liquid.
•
The apparatus must be connected to a main socket-outlet with a protective
earth connection.
•
Any changes or modifications in construction of this devies which are not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
