Part No. 52546
Genie GS-2668 DC & GS-3268 DC
23
Operator's Manual
First Edition • Seventh Printing
Transport Instructions
Observe and Obey:
Common sense and planning must be applied to
control the movement of the machine when
lifting it with a crane.
Transport vehicle must be parked on a level
surface.
Transport vehicle must be secured to prevent
rolling while machine is being loaded.
Be sure vehicle capacity, loading surfaces and
chains or straps are sufficient to withstand
machine weight. See Specifications section.
Machine must be on level surface or secured
before releasing brakes.
Securing to Truck or Trailer for
Transit
Always chock machine wheels in preparation for
transport.
Use tie-down points on chassis for anchoring
down to transport surface.
Use chains or straps of ample load capacity.
Turn key switch to the
OFF
position and remove
key before transporting.
Inspect entire machine for loose or unsecured
items.
Brake Release Operation
1 Chock wheels to prevent machine from rolling.
2 Be sure winch line is properly secured to drive
chassis tie points and path is clear of all
obstructions.
3 Turn the brake release knob counterclockwise
to open the brake valve.
4 Pump the brake release pump knob.
After machine is loaded:
1 Chock wheels to prevent machine from rolling.
2 Turn the brake release knob clockwise to reset
the brakes.
Towing the Genie GS-2668 DC or the
GS-3268DC is not recommended. If the machine
must be towed, do not exceed 2 mph / 3.2 km/h.
