GRMPOEOC - Ethernet / PoE Extender Kit
4
6. Installation Steps
1. Please turn off the signal source and the device’s power, installation with power on may damage the
device.
2. Check if the network cable and other transmission line that will be used is occupied by other device.
3. Use a network cable to connect PoE IN port of SV-Unit and PoE Ethernet switch (if it’s not PoE
equipment, then need to use 48-54V Power Adapter), use another Network Cable or Coaxial cable to
connect EPOC port of SV-Unit and EPOC port of IPC-Unit;
4. Use a network cable to connect IP camera with PoE out port of IPC-Unit.
5. Check if the installation is correct and device is good, make sure all the connection is reliable and
power up the system.
6. Make sure the network is normal.
LED Indicator
POE IN / POE OUT RJ45
EPOC RJ45
Yellow
Green
Yellow / Green
Blink
/
Indicate
Communicating
/
On
Indicate PoE
Output, DC
Power Supply
Indicate Cable
Connecting
Indicate Cable Connection Normal
NOTICE
• Device must be connected with lightning protection grounding, otherwise Protection Level will reduce.
Please use above No.20 Wire to connect the grounding terminal.
• Please use standard CAT5e/6 cable to get the longest transmission distance.
• BNV and RJ45 port cant be available at the same time.
5. Application Diagram
I
PoE IP Camera
IPC Unit
IPC Unit
CAT5e/6
LCD
NVR
PoE Ethernet
Switch
DC54V
SV Unit
SV Unit
PoE IP Camera
