85
4. Log List Search
The logs can be used to search, and to review, any point in time of the recorded data.
Alarm, Motion, Video Loss and system related logs can be searched and played back directly
from the time of the incident.
.
To start an Event Search, press the
[Log]
button on the IR Remote and the
Log List Menu pops up, as shown below.
2. Use the Up/Down buttons [
] to the desired “Time” to playback. Use the Left/Right
buttons [
] to move to the NEXT page.
3. Press the
[ENTER]
button to start playback.
MENU TAB
CONDITION
ALL
A list of all events since the initial DVR power on procedure.
SYSTEM
Shows the System List.
NETWORK
Shows the NETWORK List.
EVENT
Shows the Events List.
VIDEO LOSS
Shows Video Loss List.
<Note>
1) Log list is saved on HDD.
2) For more detailed information press