Image Device
1/2.9“ 2.3 Mega Pixel SONY CMOS
Scanning system
Progressive
Resolution
AHD : 1080P 30FPS
, 720P 60FPS / CVBS : 1280H
Total Pixels
2000 (H)
×
1121 (V) approx. 2.24 M pixels
Effective Pixels
1984 (H)
×
1105 (V) approx. 2.19 M pixels
Shutter Speed
Auto / Manual ( 1/30(1/25) ~ 1/60000 ) / Flicker
Min. illumination
Color DSS: 0.002 Lux / BW DSS : 0.001 Lux
S/N Ratio
≥
80dB
SENS Up
x2 / x4 / x8 / x16 / x32
Day & Night
Auto / COLOR / B&W / EXT
Smart IR
Off / On
White Ballance
Auto / Auto Ext / Preset / Manual
Mirror
Off / H / V / H&V
D-Zoom
x1 ~ x8
DNR ( 3D + 2D )
Off / Low / Middle / High
Privacy
Off / On (16 points)
Motion
Off / On (16 points)
Shading
0 ~ 100%
DEFOG
Off / On
D-WDR / BLC / HLC
Off / WDR(Low / Middle / High) / BLC / HLC
Coaxial
Communication
Pelco-C Protocol or OSD Control
Language
ENG, GER, FRA, ITA, SPA, POL, RUS, POR, NED, TUR
Video Output
AHD. CVBS
Power Supply
DC12V
Power Consumption
Max 1.8W
Operating Temp.
-10
℃
~ 50
℃
PRECAUTIONS
•
Do not install the camera in extreme temperature conditions.
- Only use the camera under conditions where temperatures are
between -10
℃
and +50
℃
. Be especially careful to provide
ventilation when operating under high temperatures.
•
Do not install or use the camera in an environment where the humidity is
high.
- It can cause the image quality to be poor
•
Do not install the camera under unstable lighting conditions.
- Severe lighting change or flicker can cause the camera to work
improperly.
•
Never use the camera close to a gas or oil leak.
- It can cause malfunctions to occur.
•
Do not disassemble the camera.
- There are no user-serviceable parts inside it.
•
Do not touch the front lens of the camera.
- It is one of the most important parts of the camera. Be careful
not to be stained by fingerprint.
•
Do not drop the camera or subject them to physical shocks.
- It can cause malfunctions to occur
•
Do not expose the camera to rain or spill beverage on it.
- If it gets wet, wipe it dry immediately. Liquids can contain
minerals that corrode the electronic components.
•
Do not expose the camera to radioactivity.
- If it is exposed to radioactivity, the image sensor will fail.
* NOTE *
•
If the camera is exposed to spotlight or object reflecting strong
light, smear or blooming may occur.
•
Please check that the power satisfies the normal specification before
connecting the camera
COMPOSITION
NAME OF EACH PART
Camera
Screw
DIMENSION
SPECIFICATIONS
* In accordance with customers’ request and OSD controller’s option, the specifications can be fixed or changed without notice.
CABLE CONNECTION
1. VIDEO
2. POWER(DC12V)
Manual
